The HP ScanJet devices can be cleaned by employees.
You will need the following items:
Mild glass cleaner (ex. Windex)
Lint-free cloth
| Table of Contents | ||||
|---|---|---|---|---|
|
| Info |
|---|
Occasional cleaning of the scanner helps ensure high-quality scans. The amount of care necessary depends on several factors, including the amount of use and the environment. Perform routine cleaning as necessary. |
Clean the scanning strips
To clean the scanning strip components, follow these steps:
| 1 | Press the Power button to turn off the scanner, then disconnect the USB cable and power supply from the scanner. | |||
| 2 | Pull forward on the latch to open the document feeder hatch. |  | ||
| 3 | Clean the scanning strips with a soft, lint-free cloth that has been sprayed with a mild glass cleaner.
|  | ||
| 4 | Dry the scanning strips with a dry, soft, lint-free cloth. Wipe the strips of gray, reflective material on each strip. | |||
| 5 | Close the document feeder, reconnect the USB cable and power supply to the scanner, and then press the Power button to turn on the scanner. The scanner is now ready to use. | |||
Clean the paper path
If scanned images have streaks or scratches, use an HP paper path cleaning cloth to clean the paper path.
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
If you experience repeated document jams, clean the rollers. |
To clean the paper path, follow these steps:
| 1 | Open the sealed HP paper path cleaning cloth container, starting at the notch. Take care not to tear the cleaning cloth. | |||
| 2 | Remove the cleaning cloth and unfold it. | |||
| 3 | Load the unfolded cloth into the input tray. |  | ||
| 4 | Windows: Launch the HP Scanner Tools Utility, and then click the Maintenance tab. | |||
| 5 | Feed the cloth through the scanner. Windows: Under Clean Paper Path, click Clean to feed the cloth through the scanner.
| |||
| 6 | Place up to five pages of printed paper in the scanner. Scan and view the results. | |||
| 7 | If streaks still appear, repeat steps 3 through 6. The cleaning cloth can be cycled through the scanner up to five times within 30 minutes. After that, the cloth will dry out. If repeated cycling of the cleaning cloth does not remove the streaks from the scanned images, clean the rollers. | |||
| 8 | Windows: Under Record Cleaning Paper Path, click Record Cleaning to log this cleaning activity and update the paper path cleaning history. | |||
Clean the rollers
| Info |
|---|
Clean the rollers under the following conditions:
|
To clean the rollers, follow these steps:
| 1 | Press the Power button to turn off the scanner, and then disconnect the USB cable and power supply from the scanner. | |||
| 2 | Pull forward on the latch to open the document feeder hatch. | | ||
| 3 | On the rear of the open document feeder, use a fingertip to press the tab at the upper right corner of the pickup roller cover, and then forward to open the cover and expose the pickup rollers. |  | ||
| 4 | Using an HP paper path cleaning cloth or a clean, lint-free cloth moistened with isopropyl alcohol, wipe the pickup rollers. Wipe the rollers from the top down, rotating the rollers a full 360 degrees to ensure that you wipe the complete surface, and then close the roller cover. |  | ||
| 5 | Below the pickup rollers, wipe the rollers above and below the scanning strip. |  | ||
| 6 | Open the separation rollers cover, and then wipe the separation rollers. |  | ||
| 7 | Close the separation rollers cover. Below the separation rollers, wipe the rollers above and below the scanning strip. |  | ||
| 8 | Press on both sides of the document feeder hatch at the same time to close the hatch, and then reconnect the USB cable and power supply to the scanner.
| |||
| 9 | Press the Power button to turn on the scanner. | |||
| 10 | Windows: Update the scanner maintenance history.
| |||